Search
Close this search box.

Stool

Materials 1. Square one end of the 1 x 10 and the 1 x 4 pine boards (see squaring, page 202). 2. Cut the pieces for the stool. Measure and saw one piece at a time (see sawing, page 202). Use...

Old-time skate scooter

Materials - common nails (4d and 8d or larger) - crosscut saw - flat, 4-inch L brackets and screws - hammer - hand drill with twist drill bit - lumber (6-foot 2 x 4 or two 3-foot 2 x 4's; 1x1;...

Walking-tall stilts

A long time ago, people used stilts to walk above flooded ground. You can use stilts to make you taller, to help you look over high fences, or to pretend you're the tall man in the circus. Materials...

Bamboo wind chimes

Bamboo is a giant grass that grows in lands that are very hot and wet. It is stiff, like wood, and has a hollow stem. Materials - bamboo pole - coping saw - hand drill with j-inch twist drill...

Helpful hints

The following information will help you make the projects in this section. If a special skill is needed, the directions will tell you the page on which that skill is explained. For example: "Saw...